The AP x Swatch Royal Pop leaves the boutique on a calfskin strap, worn like a pocket watch. This steel strap for the Royal Pop — part of WatchCollab's Audemars Piguet x Swatch straps range — is a full metal integrated bracelet with its own octagonal case. It turns the watch into the wristwatch it was drawn to be, with no modification and nothing to unscrew.
It is a one-piece build in stainless steel: an adapter case that holds the watch head, and an integrated bracelet that flows out of it in a single line. Brushed surfaces, polished chamfers, eight hexagonal screws on the bezel — the details are read from the Royal Oak vocabulary and executed in metal, not moulded.
Solid stainless steel, gold or silver
The case and every link are machined from stainless steel, finished in gold or in silver. Each link is brushed on top with a polished bevel along its edge, so the bracelet catches the light the way an integrated metal bracelet should. It has real weight on the wrist — the difference between a watch you wear and an accessory you clip on.
Folding clasp with push-buttons
The bracelet closes with a concealed folding deployant clasp, released by two lateral push-buttons. It opens flat, folds back under the bracelet and disappears entirely once closed. Length is adjusted by removing links, so the bracelet ends up sized to your wrist rather than to the nearest hole.
Built around the Royal Pop's exact case
The adapter case is machined to the Royal Pop's octagonal profile. The bezel, the eight screws and the Petite Tapisserie dial stay fully exposed, while the edges of the watch are shielded. The crown cut-out is positioned per model, which is why you choose your Royal Pop below rather than a generic size.
At a glance
- Construction: one-piece integrated bracelet and adapter case, stainless steel.
- Finish: gold or silver, brushed links with polished bevels, eight hexagonal bezel screws.
- Closure: concealed folding clasp with two push-buttons, adjustable by links.
- Fit: engineered for the Audemars Piguet x Swatch Royal Pop only — precise and rattle-free.
- Reversible: the watch returns to its original strap configuration at any time.
- Watch not included.
Which Royal Pop is yours?
Ocho Negro, Huit Blanc, Otto Rosso, Green Eight, Orenji Hachi, Otg Roz, Làn Ba, Blaue Acht — every model in the collection spells the number eight, for the eight screws of the Royal Oak, in a different language and colour. Gold warms up the dark dials; silver keeps the pastels crisp. Pick your model and finish above so the crown cut-out matches your watch. Each Royal Pop also has its own page, with every strap and case built for it — see Royal Pop straps & cases by model.
How to fit it
- Release the Royal Pop from its original strap.
- Open the case, seat the watch head inside with the crown aligned with the cut-out, and close it.
- Size the bracelet by removing links until it sits snug without pressing.
- Close the folding clasp — it should click and sit flat.
Care
Wipe with a soft dry cloth. For a deeper clean use lukewarm water and mild soap, then dry thoroughly, especially around the clasp. Avoid solvents, chlorinated water and abrasive cloths, which dull the finish over time.
FAQ
Will it damage or alter my watch?
No. The case holds the Royal Pop without modification, and the watch goes back on its original strap whenever you like.
Why do I have to choose my model?
Because the crown is not in the same place on every Royal Pop. Selecting your model gets you the case with the cut-out in the right position.
Can I resize it myself?
Yes. The bracelet is adjusted by removing links with a standard pin tool. Any watchmaker will also do it in a few minutes.
Is the finish durable?
It is applied over stainless steel and holds up to daily wear. Like any metal finish it will mark if dragged across abrasive surfaces, so treat it as you would a dress watch bracelet.
Is this an official Audemars Piguet or Swatch product?
No. It is an independent WatchCollab accessory, compatible with the Royal Pop. The watch is not included.
Prefer another material? The ceramic strap for the Royal Pop is built link by link in polished ceramic, and the premium rubber strap is the lighter option for sport and water.
WatchCollab is an independent brand. We are not part of the Swatch Group and are not affiliated with Omega, Blancpain or Audemars Piguet.
The size of our Audemars Piguet x Swatch Royal Pop straps
Our Royal Pop strap & case combo is custom made to fit the Audemars Piguet x Swatch Royal Pop, turning your pocket watch into a wristwatch you can wear every day. The strap has a standard, adjustable size that fits all wrists.
Case: 42mm bioceramic, custom fitted for the Royal Pop, with push-pin spring bars
Wrist circumference: 13-25cm | 5"-12"
Strap material: premium rubber — waterproof, anti-UV, dustproof and hypoallergenic
Strap width: 20mm
Buckle width: 18mm.
Why buy from us?
Fast, tracked shipping on every order
Because we take particular care in selecting our products.
Our products are designed specifically for Swatch collaborations.
Our items are tested and approved by our team.
We are enthusiasts and we do everything we can to help you discover our items!
A few reasons why you should buy from us:
- 100% secure online ordering
- New products perfectly suited to your watch
- Knowledgeable and professional customer service
- Thousands of satisfied customers
- Satisfaction guaranteed or your money back.
- All items are in stock and ready to ship when you order
- Most customers who love our products come back for additional purchases!
Shipping
Express: 1 to 2 business days — €5.99
Standard: 3 to 5 business days — €3.99
Free standard shipping on every order of 2 straps or more.
Orders are prepared and shipped within 24 hours with a tracking number. Taxes included — no additional fees at delivery.
Secure payment
100% secure payment (3D Secure) with the following payment methods:
